KF-NaF-AlF3 System: Liquidus Temperature and Phase Transition

JOM - The development of low-temperature aluminum electrolysis makes it possible to reduce energy consumption and greenhouse gas emissions. The KF-NaF-AlF3-based electrolyte is a promising...     

一种分散在多孔碳上的碳包覆硅负极的制备及应用

硅负极具有高比容量的显著优势,其理论比容量（4 200 mA∙h/g）达到传统石墨负极的10倍以上,被认为是锂离子电池最有潜力的负极之一。然而,硅负极存在导电性较差、充放电过程中体积膨胀巨大等诸多问题,导致其循环性能较差,限制了大规模实际应用。本文提供了一种高性能硅负极的制备方法及应用,通过将硅负极分散在多级孔碳中,连同黏结剂聚丙烯腈涂覆在集流体上,再对极片进行热处理实现聚丙烯腈碳包覆,有效提高电极的整体导电性并能为巨大的体积变化提供空间,从而提升硅负极的大倍率性能和循环稳定性。     

Thermal management and catalytic combustion stability characteristics of premixed methane/air in heat recirculation meso‐combustors

In order to illuminate heat recirculation effect on catalytic combustion stability and further improve energy conversion efficiency in meso‐combustor, the catalytic combustion characteristics of the combustor with/without preheating channels are numerically studied at steady conditions. It is found that methane conversion rate and combustion efficiency increases by 2% to 3% and approximately 9% in the heat recirculation meso‐combustor, indicating that heat recirculation effect facilitates more complete combustion of methane and medium components. Preheating channels show positive effects on improving combustion stability in the heat recirculation meso‐combustor. On one hand, preheating channels facilitate heat recirculation effect, and heat recirculation rate exceeds 10% for all cases and reaches 31.8% with an inlet velocity of 0.5 m/s, leading to significant increment of methane‐specific enthalpy at the preheating channel outlet. On the other hand, Rh(s)/O(s) ratios of catalytic surface and catalytic surface temperature in main reaction zone are enlarged by the preheating channels, facilitating methane adsorption at catalytic surface. Specially, most of fuels are consumed in a shorter distance with higher methane conversion speed, which brings benefits to promote combustion efficiency and may be helpful to inhibit the combustion instability in heat recirculation meso‐combustors.     

Special Issue on Generating Realistic Visual Data of Human Behavior

International Journal of Computer Vision -     

Nb和时效时间对热轧中锰TRIP钢中P偏聚的影响

热轧态中锰TRIP钢首先经650 ℃退火2 h,随后在550 ℃进行等温时效热处理,采用场发射扫描电镜(FE-SEM)研究该钢中P的偏聚和时效析出行为的变化情况。结果表明,中锰TRIP钢中P在晶界的偏聚是一种非平衡偏聚现象,临界时间约为50 h,与理论计算结果48 h较为吻合。在局部偏聚区域内,C与P存在共偏聚的关系,即P偏聚量高的地方,C含量也高。而合金元素Nb具有抑制P偏聚的效果,在20~70 h时效时间内,可以相对降低6.57%~19.5%的最大P偏聚量。根据电子背散射衍射(EBSD)菊池线分析,P偏聚量低于2.28at%时,P为固溶状态,高于2.28at.%时,P为析出状态。     

污泥生物炭中氮硫行为及环境效应研究进展

污泥生物炭中氮硫元素含量高，其氮硫行为和环境效应对全球气候变化的影响不容忽视。以往的研究中，研究者往往以富碳生物炭作为主要研究对象，关注碳对全球气候变化的行为和功效，而对氮硫元素的作用关注不够。本文从原始污泥基本性质到其热解过程，再到生物炭的老化，逐步对污泥生物炭整个生命周期内氮硫的行为及其环境效应研究进行综述，并对未来应注重开展的研究方向进行展望，为生物炭中氮硫元素固定、释放及与之关联的环境效应和温室气体排放控制研究提供理论基础。分析表明，污泥中氮元素含量普遍高于硫元素，且热解过程中氮比硫更容易转移至气相产物。氮硫元素随热解温度的增加，在三相产物中的分配都是炭中持续减少，油中先增后减，气中一直增加。高温（＞800℃）条件下，气相中的氮含量高于固相，而硫元素则仍然主要存在于固相中。污泥生物炭老化及其环境效应研究表明，污泥生物炭氮硫元素与土壤的相互作用及其温室效应问题在今后的研究中应引起重视。     

New doctors ranking system based on VIKOR method

Nowadays, we can use different websites that help us make decisions about various aspects of our lives. However, privacy protection prevents websites from providing personalised guidelines to users. We propose a novel doctor‐ranking system (DRS) based on multi‐criteria group decision‐making (MCGDM) method to address the problems of privacy protection. The following aspects differentiate our proposed DRS model from previous works: (a) textual information reviews are used to identify user preferences and complementary criteria, (b) criteria weights are determined by term frequency inverse document frequency (TF‐IDF) instead of Delphi method or expert opinion, (c) intuitionistic fuzzy sets (IFSs) are used to replace sentiment analysis to express subjective user criteria, and (d) VIsekriterijumsko KOmpromisno Rangiranjie (VIKOR) method for MCGDM with IFSs is used to solve the doctor‐ranking problem. We apply our proposed model to datasets from Haodf.com to compare the performance of our method with that of sentiment analysis and technique for order performance by similarity to ideal solution (TOPSIS) methods. The experimental results show that our method provides accurate ranking and increases the reliability of DRS.     

矿粉颗粒表面微观形貌对过滤性能的影响

为研究矿粉表面微观形貌对过滤性能的影响,将-200目80%的5种不同的铁精矿粉A、B、C、D、E在过滤压力0.06 MPa、过滤时间3 min的条件下进行过滤试验;并测定5种铁精粉的最大分子水和最大毛细水,用扫描电镜观察其微观形貌。试验结果表明:5种矿粉的滤饼水分、最大分子水和最大毛细水由大到小依次均是A、B、C、D、E,并且与矿粉的表面微观形貌密切相关。矿粉颗粒表面粗糙,吸附较多细小颗粒,其比表面积和表面能较大,毛细管作用较强,所含的最大分子水和最大毛细水较大;毛细管作用强使得过滤速率降低,毛细水的脱除难度增大,最终导致滤饼水分较高。     

计及储能动态的VSG惯量阻尼自适应控制研究

随着风力发电、光伏发电等新能源发电渗透率增加，电力系统的等效惯量和等效阻尼逐渐减小，其稳定性问题变得越来越严峻。虚拟同步发电机（virtual synchronous generator， VSG）技术的提出能有效地解决这一问题。然而，传统的VSG并网逆变器采用恒惯量和阻尼控制，在系统受到扰动时，其鲁棒性较差。因此，为增强系统的鲁棒性，优化其频率响应曲线，本文提出了一种计及储能装置动态特性的并网VSG惯量阻尼自适应控制策略。首先，阐述了VSG的基本工作原理，然后通过建立其数学模型分析不同旋转惯量和阻尼系数对系统输出特性的影响。在此基础上，结合同步发电机（synchronous generator， SG）功角特性曲线和频率振荡曲线设计出旋转惯量和阻尼系数的自适应控制策略，该控制策略通过引入惯性环节以较好地匹配储能装置的动态特性。最后，通过MATLAB/Simulink仿真软件对比分析了所提控制策略和传统的VSG恒惯量和阻尼控制，结果验证了所提控制策略的正确性。     

Facile preparation of highly dispersed Pt nanoparticles supported on heteroatom-containing porous carbon nanospheres and their catalytic properties for the reduction of 4-nitrophenol

Heteroatom-containing porous carbon nanospheres with a high surface area were firstly fabricated by pyrolysis of poly(cyclotriphosphazene-co-4,4′-sulfonyldiphenol) (PZS) nanospheres which were fabricated by a facile polycondensation between hexachlorocyclotriphosphazene and 4,4′-sulfonydiphenol. Then the porous carbon nanosphere-supported Pt nanoparticles (Pt NPs@C-PZS) were synthesized by a simple microwave reduction method, during which Pt NPs were highly dispersed on the surface of carbon supports. The surface morphologies and chemical composition of the as-obtained C-PZS and Pt NPs@C-PZS nanocomposites were characterized by SEM, TEM, XRD, XPS, and Raman spectroscopy. Characterization results showed that the Pt NPs with an average diameter of 2 nm was well anchored onto the surface of C-PZS nanospheres. In addition, the as-prepared Pt NPs@C-PZS nanocomposites exhibited an excellent catalytic capability towards the reduction of 4-nitrophenol to 4-aminophenol by excessive sodium borohydride (NaBH₄) at room temperature.